User Manual

Management tab.

2. Choose a profile to edit, or name the new profile in the Profile Management window.

Enter the SSID of the AP the STA connects to.

3. On the Security tab, choose the WPA/WPA2 radio button.

OR: On the Security tab, choose the 802.1X radio button.

4. Choose PEAP (EAP-GTC) or PEAP (EAP-MSCHAP V2) from the drop-down menu.

– PEAP (EAP-GTC) is designed to support one-time Password (OTP), the Windows NT or

Windows 2000 domain, and L DAP user databases over a wireless LAN. It is based on

EAP-TLS authentication but uses a password instead of a client certificate for

authentication.PEAP (EAP-GTC) uses a dynamic session-based WEP key derived from

the client adapter and RADIUS server to encrypt data.

Networks using an OTP user database require entering a hardware or software token

password to start the PEAP (EAP-GTC) authentication process and to gain access to the

network. Networks using a Windows NT or 2000 domain user database or an L DAP user

database (such as NDS) require entering a username, password, and domain name to

start the PEAP (EAP-GTC) authentication process.

– The PEAP (EAP-MSCHAP V2) authentication type is based on EAPTLS authentication,

but uses a password instead of a client certificate for authentication. PEAP

(EAP-MSCHAP V2) uses a dynamic session based WEP key, which is derived from the

client adapter and RADIUS server, to encrypt data.

To enable PEAP (EAP-GTC) security:

1. To use PEAP (EAP-GTC) security, the server must have PEAP certificates, and the

server properties must already be set. Check with the IT manager.

2. If PEAP is supported, choose PEAP from the drop-down menu on the right, then click

the Configure button.