User Manual

client certificate for authentication.

2. If EAP-TTLS is supported, choose EAP-TTLS from the drop-down menuon the right,

then click the Configure button.

Figure 2-2. EAP-TTLS Configuration Window

3. Select the appropriate certificate from the drop-down list and click OK.

4. Specify a user name for EAP authentication:

Check Use Windows User Name to use the Windows user name as the EAP user name.

OR: Enter a EAP user name in the User Name field to use a separate user name and

password and start the EAP authentication process.

5. Click the Advanced button and:

– Leave the server name field blank for the client to accept a certificate from any server

with a certificate signed by the authority listed in the Network Certificate Authority

drop-down list. (recommended)

– Enter the domain name of the server from which the client will accept a certificate.

– Change the login name if needed.

6. Click OK.

7. Enable the profile.

PEAP Security

To use PEAP security, access the Security tab in the Profile Management window.

1. In the ACU, edit the security settings by clicking New or Modify on the Profile