User Manual

Figure 1-7. Driver Files Search Results Window

6. Once Windows finds the driver for the device, click Finish to complete driver installation.

Use the ACU to configure the device driver. The ACU provides extensive online help to

aid in configuring the device.

Windows NT 4.0 Installation

This section describes the Windows NT 4.0 driver installation, TCP/IP setup, and ACU

installation.

Windows NT 4.0 Driver Installation and TCP/IP Setup

Windows NT 4.0 does not support “plug-and-play,” therefore the AW-GM120 NDIS driver

installation uses an approach that is different from the installation used in other OSs.

Insert the AW-GM120 Wireless Network Adapter, and follow these steps to install the

NDIS driver:

1. Windows NT 4.0 Network Properties windows displays. Click Add to continue.

2. On the Select Network Adapter dialog box, click Have Disk.

3. Manually enter the location of where the Atheros NDIS 4.0 driver is located. For

example, D:\ndis\bin\production\install.

4. Click OK to continue.

5. Make sure AW-GM120 Wireless Network Adapter is selected.

6. Click OK to continue.

Windows NT 4.0 binds the TCP/IP protocol to the AW-GM120 Wireless Network Adapters,

so TCP/IP properties have to be entered. Depending on the type of network the STA

connects to, Gateway and DNS Configuration information may also be required. IP

configuration information (DHCP or assigned IP address, Gateway and DNS server IP