User's Manual

4-9
Create profile for selected network connection in profile list and add it in to profile list.
Advanced page
z Power Save
 None: without power save mode
 Min: wake up every two time interval to
receive packets
 Max: wake up every ten time interval to
receive packets
z Wireless Mode
 802.11b
 802.11g/b
z 802.11b Preamble Mode
 Long: higher quality but with lower
performance than preamble short mode
 Short: Normal quality but with higher performance then preamble long mode.
 Auto: select the proper preamble mode by current signal frame information.
z Fragment Threshold
The threshold of fragment length. Higher threshold increase data transition performance
with good signal quality. Pool signal quality results more worst data throughput on high
fragment threshold.
z RTS Threshold
Request to send threshold. The request will not send out until the accumulated data over
threshold.
z WOL (Wake On LAN)
The wake-on-LAN is applied for remote control purpose. You could wake up a system
through network packets. For AzureWave802.11 b/g PCI Express WLAN Card, only the
same adapter on another system could wake it up.
 Input MAC Address: the six two-digit numbers of AzureWave802.11 b/g PCI Express WLAN Card
on target system.
 Wake Up: press this button to wake it up
z Set Defaults
Restore the default value to be current setting
z Apply
Apply the current setting to GUI