User's Manual

8
Step 2 Wireless setting
After you choosing “Create a new network” and enter next step, you can setup SSID
and encryption way for wireless security. The device support WEP/None/
WPAPSK(TKIP)/ WPA2PSK(AES)/ WPA2PSK(TKIP)+(AES)
Step 3 Encryption Key
Then follow instruction to input security key based on different encryption way.
Step 4 Internet Setting
AW -GA201 support following
connection type
-DHCP
-Static IP
-PPPoE
-PPTP
AW -GA201 will detect you network
status and show your network protocol
as default item. You can also pull down
the select bar to change connection
type.
Connecting PC to AW -GA201
After your complete Setup Wizard
process, the device will be configured
as a Access Point or Client mode link to specific network according to your previous
setup.
*AW -GA201 is configured as AP/RT mode
Please connect you PC to AW -GA201 directly. After connection is successful, the
wireless audio utility will be opened automatically.
*AW -GA201 is configured as Client mode
Device will connect to dedicated network as your configuration on setup wizard, please
connect your PC to same network, the wireless audio utility will be opened
automatically.
Chapter 4: Wireless Audio Utility
Chapter 5 : Wireless Audio Utility
AzureWave wireless audio utility is
consist of 3 major features:
-PC speaker and wireless audio
switch (Left side)
-Device Management (Right side)
-Setting (Bottom side )
Status, Advanced, Wizard and
About