User's Manual

3
up status.
Ethernet
. The Ethernet LED displays two modes. If the LED is continuously lit, the device is
successfully connected to a device through the Ethernet port. If the LED is flashing, it is
an
indication of any network activity.
Wireless LAN
If the LED is flashing, it means Wireless LAN is acting.
Wireless Audio
The Wireless Audio LED displays three modes.
- LED is off, it means nobody run wireless audio feature (but could be
use AP feature).
- LED is continuously lit, means specific computer is successfully
connected to the device and enable wireless audio feature.
- LED is flashing, it means wireless audio transmission is acting.
2.3 Ceck your materials on the package
The AW -GA100 package should includes following items,
1. AW -GA100
2. Installion CD, the CD includes driver, utility and user’s manual
3. RJ45 cable
4. Quick Installation Guide
5. Power Adapter (5V DC output )
Chapter 3: How to Make Wireless Audio Feature Working?
It’s very easy to enable AW -GA100 wireless audio feature, just need to following 3
steps,
Step 1: Install your wireless audio driver and utility on your computer
Step 2: Power on your AW -GA100, connect AW -GA100 to power speaker or decoder.
Step 3: Connect PC to AW -GA100, Run the utility to enable wireless audio feature, then
your can start to enjoy the convenience of wireless audio.
Below is the detailed instruction for above 3 steps
Step 1: Install your wireless audio driver and utility on your computer
The AzureWave wireless audio driver will create a virtual sound system in your PC,
which sends the audio output of any application to the AW -GA100 and the stereo
system.
The AzureWave wireless audio utility will help to manage single or milti-devices exist on
the same network, you can also chose PC orginal audio output or wireless audio output
on the utility.