User's Manual

5
2. Key Features
2-1. WLAN
 Support 802.11ac 2x2,Wave-2 compliant with MU-MIMO
 Complete 802.11n MIMO solution for 2.4GHz and 5Ghz band
 Maximum PHY data rate up to 173.3 Mbps using 20MHz bandwidth, 400Mbps using 40MHz
bandwidth, and 866.7Mbps using 80MHz bandwidth.
 Backward compatible with 802.11a/b/g devices while operating at 802.11n data rates
 Backward compatible with 802.11a/n devices while operating at 802.11ac data rates.
 Complies with PCI Express Base Specification Revision 1.1
 PCIe LTR/L1.Off state supported
 IEEE 802.11a/b/g/n/ac compatible WLAN
 IEEE 802.11e QoS Enhancement (WMM)
 IEEE 802.11i (WPA, WPA2). Open, shared key, and pair-wise key authentication services
 IEEE 802.11h DFS, TPC, Spectrum Measurement
 WAPI (Wireless Authentication Privacy Infrastructure) certified.
 Cisco Compatible Extensions (CCX) for WLAN devices
 Frame aggregation for increased MAC efficiency (A-MSDU, A-MPDU)
 Low latency immediate Block Acknowledgement (BA)
 Multiple BSSID feature allows the RTL8822BE-CG to assume multiple MAC identities when used as
a wireless bridge
 WiFi Direct supports wireless peer to peer applications.
 Supports Wake-On-WLAN via Magic Packet and Wake-up frame
 Transmit Beamforming
 Support S3/S4 AES/TKIP group key update
 Support Network List Offload
 CCA on secondary through RTS/CTS handshake.
 Support TCP/UDP/IP checksum offload
 Support LDPC
 Support STBC
 OFDM receive diversity with MRC using up to 2 receive paths. Switch diversity used for DSSS/CCK
 Fast receiver Automatic Gain Control (AGC)
 Maximum data rate 54Mbps in 802.11g, 300Mbps in 802.11n and 866.7bps in 802.11ac.