User's Manual

6. Pin Definition

Pin Description (1216 NGFF)

Pin No. Definition Basic Description Type Voltage

1 NC Floating Pin, No connect to anything. Floating

2 NC Floating Pin, No connect to anything. Floating

3 NC Floating Pin, No connect to anything. Floating

4 3.3V 3.3V power supply VCC 3.3V

5 3.3V 3.3V power supply VCC 3.3V

6 GND Ground. GND

7 RESERVED Floating Pin, No connect to anything. Floating

8 RESERVED Floating Pin, No connect to anything. Floating

9 RESERVED Floating Pin, No connect to anything. Floating

10 RESERVED Floating Pin, No connect to anything. Floating

11 RESERVED Please don't connect to this pin. N/A

12 RESERVED Please don't connect to this pin. N/A

13 RESERVED Please don't connect to this pin. N/A

14 RESERVED Floating Pin, No connect to anything. Floating

15 RESERVED Floating Pin, No connect to anything. Floating

16 RESERVED Floating Pin, No connect to anything. Floating

17 GND Ground. GND

18 RESERVED Floating Pin, No connect to anything. Floating

19 RESERVED Floating Pin, No connect to anything. Floating

20 GND Ground. GND

21 RESERVED Floating Pin, No connect to anything. Floating

22 RESERVED Floating Pin, No connect to anything. Floating

23 GND Ground. GND

24 BT_WAKE

Host wake BT. No function, please don't connect to

this pin.

N/A

25 RESERVED Floating Pin, No connect to anything. Floating

26 GND Ground. GND

27 SUSCLK Please don't connect to this pin. Floating

28 W_DISABLE1#

Turn off WLAN RF analog and front–end. Active low.

This pin is controlled by system. (IC internal pull up)

IN VIO

29 PEWAKE#

Open Drain active Low signal. This signal is used to

request that the system return from a

sleep/suspended state to service a function initiated

wake event.

OUT 3.3V

30 CLKREQ# Reference clock request. I/O 3.3V