User's Manual

- 6 -

The throughput measurement shows the performance of the TCP/IP layer over the wireless link. To achieve

the best results,

run the measurement test in a clean environment with as little interference as possible . The test can be run

with the adapter

connected to either an Infrastructure network (see Fig. 2.2) or an ad hoc network (see Fig. 2.3). An AP that is

known to be

in good working order should be used for the infrastructure mode test.

MEASURING THROUGHPUT USING NETIQ CHARIOT

Test Procedure

1. Bring up the AW-CM235NF demo boar with the IP address set as 192.168.1.110.

2. Connect the reference computer with Chariot Console, which is assigned an IP address of 192.168.1.100,

to the LAN

port of the AP

3. Verify that communication exists between the reference computer and the AW-CM235NF demo board by

pinging 192.168.1.100

from the AW-CM235NF host console.

4. Set up Chariot.

HOST

COMPUTER.

AW-CM235NF

EndPoint

Reference

Computer

Chariot

Console