User's Manual

- 7 -
MEASURING THROUGHPUT USING NETIQ CHARIOT
Test Procedure
1. Bring up the AW-CM217NF demo boar with the IP address set as 192.168.1.110.
2. Connect the reference computer with Chariot Console, which is assigned an IP address of 192.168.1.100,
to the LAN
port of the AP
3. Verify that communication exists between the reference computer and the AW-CM217NF demo board by
pinging 192.168.1.100
from the AW-CM217NF host console.
4. Set up Chariot.
a. On the host computer, activate EndPoint:
b. Using Chariot Console on the reference computer, create two pair groups (192.168.1.100 and
192.168.1.110) using the Chariot Throughput.scr script. Run the throughput test for a specified period of time
and observe the results.
RF Tx/Rx Performance Test
CREATING A Tx TEST
HOST
COMPUTER.
AW-CM217NF
EndPoint
Reference
Computer
Chariot
Console
HOST
COMPUTER.
AW-CM217NF
EndPoint
A
P
LAN
Reference
Computer
Chariot
Console
FIG. 2.2
FIG. 2.3