User's Manual

- 8 -
1.3 Initial Command
As the information showed on your screen, please enter these commands below to start your test.
(Figure 9)
Command: 1 Wi-Fi testing
Command: 2 BT testing
Figure 9
1.3 Generate 802.11a/b/g/n Packet commands
a. Tx on CH 6 at 10 dBm with a CCK-11Mbps data rate in 20 MHz BW mode on path A
25 // Stop Tx
10 1 1 // Set Path A Only
30 0 // Set to 2.4 GHz Band
112 0 // Set to 20 MHz BW
12 6 // Set to CH 6