Manualshelf

User's Manual

ManualsBrandsAzureWave Technologies ManualsElectronics802.11ac/a/b/g/n 2X2 MIMO WLAN & Bluetooth M.2 module
12345678910
- 7 -
Bring up the ethernet interface and specify an IP address to the Target platform. This address must match
the IP for the DUT in which the Host XP is expecting.
At this point, the target is ready to receive Labtool commands. On the Windows XP laptop where the
Labtool release was downloaded, go to the folder shown below:
Edit the “SetUp.ini” file as shown in the lines highlighted in RED below. The setup
DutIpAddress will be the IP address of your target.