User's Manual

- 11 -
116 for VHT_SS2_MCS5
117 for VHT_SS2_MCS6
118 for VHT_SS2_MCS7
119 for VHT_SS2_MCS8
120 for VHT_SS2_MCS9
After you type above command, you can measure the 802.11b/g/n packet by your RF test instrument (exp:
Agilent 4010, IQview…).
1.4 Generate 802.11b/g/n continuous symbol Commands
a. Cont. Tx on CH 36 at 8 dBm with a MCS7 Data rate in 20 MHz BW Mode on Path A
17 // Stop Cont. Tx
25 // Stop Tx
10 1 1 // Set Path A
30 1 // Set to 5 GHz Band
112 0 // Set to 20 MHz BW
12 36 // Set to CH 36
22 0 36 8 1 // Set to CH 36 at 8 dBm Output Power with OFDM Data Rate on Path A
25 1 22 // Tx at MCS 7
25 // Stop Tx
17 1 22 // Cont. Tx at MCS7
17 // Stop Cont. Tx
1.5 Test RX sensitivity Commands
a. Rx on CH 157 in 20 MHz BW Mode on both Path A
25 // Stop Tx
10 1 1 // Set to Path A
30 1 // Set to 5 GHz Band
112 0 // Set to 20 MHz BW
12 100 // Set to CH 100
31 //
Clear all the received packets
32 // Get Rx Packet Count and then clear the Rx packet counter
1.6 Others Commands