Product Datasheet

www.aztech.com
Head Office
AZTECH TECHNOLOGIES PTE LTD.
31 Ubi Road 1, Aztech Building
Singapore 408694
Tel: [phone] Fax: [phone]
Hong Kong Office
AZTECH SYSTEMS (H.K) LTD.
Rooms 2-10, 3rd Floor, Core Building 1
No. 1Science Park East Avenue
HongKong Science Park
Shatin,New Territories, Hong Kong
Tel: [phone] Fax: [phone]
Germany Office
AZTECH SYSTEMS GmBH.
Kreuzberger Ring 22, 65205 Wiesbaden
Germany.
Tel: [phone] Fax: [phone]
Malaysia Office
AZ-TECHNOLOGY SDN BHD.
Unit 719 Block A Kelana Business Centre
No. 97, Jalan SS7/2 Kelana Jaya
47301 Petaling Jaya
Selangor Darul Ehsan, Malaysia
Tel: [phone] Fax: [phone]
China Office
AZTECH COMMUNICATION DEVICE (DG) LTD.
Jiu Jiang Shui Village, Chang Ping Town
Dong Guan City,
Guang Dong Province, China.
Tel: [phone] Fax: (86) (769) 8393-1138
USA Office
AZTECH LABS, Inc.
4005 Clipper Court, Fremont
CA 94538, U.S.A.
Tel: [phone] Fax: [phone]
Mediatek MT7620A Network Processor
+ 2.4 GHz Wireless chip
SPI FlashRom : 8M Byte
OS Independent with TCP/IP protocol installed
Supply voltage range : 100VAC – 240VAC (50/60 Hz)
Power Consumption : Less than 4W
1 x RJ45 (Fast Ethernet)
1 x Factory Default Reset (Button)
Specications
HARDWARE I Key Chipset
Mediatek RT5592EP 5GHz RF chip
DDR2 DRAM : 64M Byte
Memory 0
o
to 40
o
Celsius
( 32
o
to 104
o
Fahrenheit)
TEMPERATURE
I Operating
30% to 90% Relative Humidity
(Non-Condensing)
HUMIDITY
I Operating
25
o
to 70
o
Celsius
(-13
o
to 158
o
Fahrenheit)
Non-Operating
30% to 95% Relative Humi dit y
(Non-Condensing )
Non-Operating
PLATFORM SUPPORT
POWER REQUIREMENTS (TBC)
EXTERNAL CONNECTORS
Max Current : 0.12A
1 x WPS (Button)
4 x Antennas (Internal embedded)
105(L) x 58 (W) x 42 (H) mm / 160 gMEASUREMENTS
Asia Pacic/ Europe : CE, CB
USA : FCCREGULATORY APPROVALS
Repeat Your Wi-Fi Coverage
Extended wireless range
Wireless range from router
Modem Dual Band Router
iPhone®/Android®
Tablet
Internet
Notebook
ROOM 1
ROOM 2
1. GREEN *LED should be ON if WL580E is connected to Router and
RSSI value is equal to HIGH. *LED should be OFF while
WL580E is booting up. *LED should be OFF while WL580E is
doing WPS authentication.
2. GREEN *LED should be ON if WL580E is connected to Router and
RSSI value is greater than or equal to MID. *LED should be
OFF while WL580E is booting up. *LED should be OFF while
WL580E is doing WPS authentication
3. GREEN *LED should be blinking if WL580E is NOT connected to any
Router. *LED should be ON if WL580E is connected to Router
and RSSI value is greater than or equal to LOW. *LED should
be OFF while WL580E is booting up. *LED should be OFF
while WL580E is doing WPS authentication.
YELLOW *LED should be ON during boot up. After fully bootup, LED
will OFF. *LED should be blinking for 2 mins once WPS button
is pressed. *LED should stop blinking and ON for 5 secs when
WPS authentication is successful. Then LED should be OFF.
*LED should be OFF if WL559E is connected to Router.
LED Colour Behaviour
1
2
3
2.4
GHz
2.4
GHz
5
GHz
5
GHz