Product Datasheet

www.aztech.com
Head Office
AZTECH TECHNOLOGIES PTE LTD.
31 Ubi Road 1, Aztech Building
Singapore 408694
Tel: [phone] Fax: [phone]
Hong Kong Office
AZTECH SYSTEMS (H.K) LTD.
Rooms 2-10, 3rd Floor, Core Building 1
No. 1Science Park East Avenue
HongKong Science Park
Shatin,New Territories, Hong Kong
Tel: [phone] Fax: [phone]
Germany Office
AZTECH SYSTEMS GmBH.
Kreuzberger Ring 22, 65205 Wiesbaden
Germany.
Tel: [phone] Fax: [phone]
Malaysia Office
AZ-TECHNOLOGY SDN BHD.
Unit 719 Block A Kelana Business Centre
No. 97, Jalan SS7/2 Kelana Jaya
47301 Petaling Jaya
Selangor Darul Ehsan, Malaysia
Tel: [phone] Fax: [phone]
China Office
AZTECH COMMUNICATION DEVICE (DG) LTD.
Jiu Jiang Shui Village, Chang Ping Town
Dong Guan City,
Guang Dong Province, China.
Tel: [phone] Fax: (86) (769) 8393-1138
USA Office
AZTECH LABS, Inc.
4005 Clipper Court, Fremont
CA 94538, U.S.A.
Tel: [phone] Fax: [phone]
Wireless IEEE802.11b/g/n Ethernet IEEE 802.3 10/100, IEEE802.3u, IEEE802.3ab
IEEE802.11n: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11g: BPSK, QPSK, QAM-16, QAM-64 IEEE802.11b: CCK, QPSK, BPSK
Wireless: 64/128-bit WEP, WPA, WPA2
Key Chipset: Ralink RT3352 Network Processor + WLAN Controller SPI FlashRom: 4M Byte (Default) DDR2 DRAM: 64M Byte
OS Independent with TCP/IP protocol installed
1 x RJ45 for 10/100Base-T LAN 1 x Factory Default Reset Button 1 x WPS button 2 x Internal antennas
105(L) x 58 (W) x 42 (H) mm
Specications
Protocol/Standards
Network Support OFDM 1024/256/64/16/8 QAM, QPSK, BPSK and ROBO Modulation Scheme Wireless
Europe (ETSI): 2.412GHz ~ 2.742GHz (CH1 ~ CH13)Wireless Frequency Band
Security Support
Hardware
Platform Support
Power Requirements Supply voltage range: 100VAC – 240VAC (50/60 Hz) Power Consumption : Less than 4W Max Current : 0.12A
External Connectors
Dimension
160 gWeight
Operating : 0 o to 40 o Celsius(32 o to 104 o Fahrenheit) Non-Operating :-25 o to 70 o Celsius(-13 o to 158 o Fahrenheit)Temperature
Operating : 30% to 90% Relative Humidity (Non-Condensing) Non-Operating : 30% to 95% Relative Humidity (Non-Condensing)Humidity
Repeat Your Wireless Coverage
Extended wireless range
Wireless range from router
Modem Fiber or ADSL/Cable Router
iPhone®/Android®
Tablet
Internet
Notebook
ROOM 1
ROOM 2
1. GREEN *LED should be ON if WL559E is connected to Router and
RSSI value is equal to HIGH. *LED should be OFF while
WL559E is booting up. *LED should be OFF while WL559E is
doing WPS authentication.
2. GREEN *LED should be ON if WL559E is connected to Router and
RSSI value is greater than or equal to MID. *LED should be
OFF while WL559E is booting up. *LED should be OFF while
WL559E is doing WPS authentication
3. GREEN *LED should be blinking if WL559E is NOT connected to any
Router. *LED should be ON if WL559E is connected to Router
and RSSI value is greater than or equal to LOW. *LED should
be OFF while WL559E is booting up. *LED should be OFF
while WL559E is doing WPS authentication.
AMBER *LED should be ON during boot up. After fully bootup, LED
will OFF. *LED should be blinking for 2 mins once WPS button
is pressed. *LED should stop blinking and ON for 5 secs when
WPS authentication is successful. Then LED should be OFF.
*LED should be OFF if WL559E is connected to Router.
LED Colour Behaviour
1
2
3