User manual

User Manual
Page 69 of 90
Policy Routing Configuration
The Policy Routing Configuration page is accessed by selecting Policy Routing
Configuration on the Advanced home page under QoS. This page enables you to
configure policy routing and QoS. The policy routing configuration is discussed as follows.
The QoS configuration is discussed in ‘‘Ingress Payload Database Configuration’’.
Policy Routing Configuration
Policy Routing ConfigurationPolicy Routing Configuration
Policy Routing Configuration
Currently routing algorithms make decision based on destination address, i.e. only
Destination IP address and subnet mask is supported. The Policy Routing page enables
you to route packets on the basis of various fields in the packet. The following fields can
be configured for Policy Routing:

Destination IP address/mask

Source IP address/mask
 Source MAC address

Protocol (TCP, UDP, ICMP, etc)

Source port