User manual

User Manual
Page 53 of 90
DMZ Settings
Setting a host on your local network as demilitarized zone (DMZ) forwards any network
traffic that is not redirected to another host via the Port Forwarding feature to the IP
address of the host. This opens the access to the DMZ host from the Internet. This
function is disabled by default. By enabling DMZ, you add an extra layer of security
protection for hosts behind the firewall.
To enable DMZ Settings:
1. On the Port Forwarding
Port Forwarding Port Forwarding
Port Forwarding page, select Enable DMZ
Enable DMZEnable DMZ
Enable DMZ. This opens the DMZ Settings
page.
2. Select the WAN Connection
WAN ConnectionWAN Connection
WAN Connection, LAN Group
LAN GroupLAN Group
LAN Group, and LAN IP Addres
LAN IP AddresLAN IP Addres
LAN IP Address
ss
s.
3. Click Apply
Apply Apply
Apply to temporarily apply the settings.
4. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.
Custom Port Forwarding
The Custom Port Forwarding page allows you to create up to 15 custom Port Forwarding
entries to support specific services or applications, such as concurrent NAT/NAPT
operation.