User manual

User Manual
Page 52 of 90
To configure port forwarding:
1. Select Advanced
AdvancedAdvanced
Advanced.
2. Select Application > Port
Application > PortApplication > Port
Application > Port Forwarding
Forwarding Forwarding
Forwarding.
3. Select WAN Connection
WAN ConnectionWAN Connection
WAN Connection, LAN Group
LAN GroupLAN Group
LAN Group, and LAN IP
LAN IPLAN IP
LAN IP. If the desired LAN IP is not
available in the LAN IP
LAN IP LAN IP
LAN IP drop-down menu, you can add it using the LAN Client
LAN Client LAN Client
LAN Client
page
pagepage
page, which is accessed by clicking New IP
New IPNew IP
New IP.
4. Select the available rules for a given category and click Add
AddAdd
Add to apply the rule for
this category. If a rule is not in the list, you can create your own rule in the User
User User
User
category. Select User
UserUser
User, and then click New
NewNew
New.
5. The Rule Management page opens for you to create new rules. Enter Rule Name
Rule NameRule Name
Rule Name,
Protocol
ProtocolProtocol
Protocol, Port
PortPort
Port Start
Start Start
Start, Port End
Port EndPort End
Port End, and Port Map
Port MapPort Map
Port Map, and then click Apply
ApplyApply
Apply.
6. Continue to add rules as they apply from each category.
7. Click Apply
Apply Apply
Apply to temporarily activate the settings.
8. To make changes permanent, click Save Settings
Save SettingsSave Settings
Save Settings.