User manual

User Manual
Page 18 of 90
For Macintosh
Unlike in Windows, Macintosh computers require that you install the USB driver first
before connecting the router.
To install the USB driver for Mac:
1. Insert the Resource CD
Resource CD Resource CD
Resource CD into your CD-ROM. This displays the CD icon on your
desktop.
2. Double-click the CD icon
CD iconCD icon
CD icon. This opens a screen displaying the CD contents.
3. Double-click the Mac
Mac Mac
Mac folder.
4. Double-click USBCDCEthernetv1_2.pkg
USBCDCEthernetv1_2.pkgUSBCDCEthernetv1_2.pkg
USBCDCEthernetv1_2.pkg.
5. If you set up an administrator name and password, the Authenticate
Authenticate Authenticate
Authenticate screen
opens. Enter Name
NameName
Name, password or phra
password or phrapassword or phra
password or phrase
sese
se, and then click OK.
6. Follow the on-screen instructions. When the installation is complete, you will be
asked to restart your computer.
7. After your computer restarts, connect the USB cable from the router’s USB
USB USB
USB port to
the USB port in your computer.
8. From the dock, select System Preferences
System PreferencesSystem Preferences
System Preferences.
9. Under Internet & Network
Internet & NetworkInternet & Network
Internet & Network, double-click Network
NetworkNetwork
Network. This opens the Network
Network Network
Network screen.
10. From the Show
Show Show
Show drop-down menu, select Ethernet Adaptor (enXX)
Ethernet Adaptor (enXX)Ethernet Adaptor (enXX)
Ethernet Adaptor (enXX). This will display
your IP Address and Subnet Mask as:
a. IP Address
IP Address IP Address
IP Address - 192.168.1.1
b. Subnet Mask
Subnet Mask Subnet Mask
Subnet Mask - 255.255.255.0.
11. Use the web interface to configure the device settings. Please refer to Setting up
Via the Quick Start
Quick Start Quick Start
Quick Start Web Interface.