User manual

User Manual
Page 17 of 90
signals and eliminates the noise.
To setup the telephone POTS Splitter:
To setup the telephone POTS Splitter:To setup the telephone POTS Splitter:
To setup the telephone POTS Splitter:
1. Locate the phone jack in your house.
2. Insert the POTS Splitter into the phone jack.
3. Plug one end of the telephone cable from the POTS Splitter’s TEL
TELTEL
TEL port and then plug
the other end into the telephone.
2. Plug one end of the Ethernet cable from the router’s ETHERNET
ETHERNET ETHERNET
ETHERNET port and then plug
the other end into the Ethernet port in your computer.
3. Connect the power adapter from the router’s 9V DC
9V DC 9V DC
9V DC port into the electrical outlet
and then press ON
ONON
ON.
USB Connection
You can also establish an additional connection with the computer using the USB port.
When using the USB, you need to install the USB driver.
To install the USB driver and connect through USB:
1. Plug one end of the USB cable from the router’s USB
USBUSB
USB port and then plug the other
end into the computer’s USB port.
2. Insert the Resource CD
Resource CDResource CD
Resource CD into your CD-ROM.
3. When the Add Hardware Wizard
Add Hardware WizardAdd Hardware Wizard
Add Hardware Wizard opens, follow the on-screen instructions. If asked
to identify where to search for drivers, select CD
CDCD
CD-
--
-ROM drive
ROM driveROM drive
ROM drive.
4. Follow the on screen instructions.