Ethernet USB Router User Manual VERSION 1.
User Manual Page 2 of 90
User Manual Contents About this Manual ......................................... 7 About the Router ........................................... 8 Requirements........................................................................... 8 Software ..........................................................................................................8 Hardware.........................................................................................................8 Package Contents .........................
User Manual Accessing the Web Manager................................................. 19 Components ........................................................................... 19 Buttons ..........................................................................................................19 Commands ....................................................................................................20 Menus.................................................................................................
User Manual Applications............................................................................ 42 Universal Plug and Play ................................................................................43 Simple Network Timing Protocol ..................................................................44 IGMP Proxy ....................................................................................................46 TR-068 WAN Access ....................................................................
User Manual Connection Status..........................................................................................80 System Log ....................................................................................................81 Remote Log ...................................................................................................82 Network Statistics .........................................................................................84 DDNS Update Status ................................
User Manual About this Manual This manual provides a discussion of the components, basic operation, and advanced configuration options of the router. Scope and Purpose This manual provides installation instructions and description of the router components and the web interface. Target Audience This manual is designed and developed for users who are required to operate and perform first-level maintenance of the router.
User Manual About the Router Congratulations on the purchase of your router. This router allows you to utilize your phone circuit to access broadband Internet without restricting you to make telephone calls. This router is designed to connect to the Internet and to your local area network (LAN) via universal serial bus (USB) or high speed Ethernet.
User Manual CD-ROM Drive Network adapter (Ethernet or USB) Package Contents Package contents are listed below. For any missing items, please contact your dealer immediately. Product contents vary for different models.
User Manual Device Design Front Panel The LEDs on the front panel gives you an idea about the power and connection status.
User Manual DSL INTERNET INTERNET Steady light Connected to a USB port Blinking light Transmitting/Receiving data Off No DSL signal Blinking light Establishing DSL signal Steady light DSL signal is established Off No Internet connection Steady light Connected to the Internet Blinking light Transmitting/Receiving data Back Panel The back panel provides ports to power up and connect the router into the network.
User Manual Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps you need to complete the installation. There are brief descriptions beside each step to help you along. Detailed instructions are provided in the subsequent pages.
User Manual Remove or Disable Conflicts To make sure the router installation moves on smoothly, you need to remove or disable conflicts that may interfere the installation. Probable conflicts may include: Internet sharing applications Proxy software Security software TCP/IP settings Internet properties Temporary Internet files Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the router installation.
User Manual Configuring TCP/IP Settings Use the default TCP/IP settings to allow the router to provide a network address to the computer, To set the TCP/IP properties: 1. Select Start > Run. Run This opens the Run dialog box. 2. Enter control ncpa.cpl and then click OK. OK This opens the Network Connections in your computer. 3. Right-click LAN and then select Properties. Properties This opens the Local Area Connection Properties dialog box. 4. Select Internet Protocol (TCP/IP) and then click Properties.
User Manual Removing Temporary Internet Files Temporary Internet files are files from Web sites that are stored in your computer. Delete these filed to purge the Internet cache and remove footprints left by the Web pages you visited. To remove temporary Internet files: 1. Select Start > Run. Run This opens the Run dialog box. 2. Enter control and then click OK. OK This opens the Control Control Panel. Panel 3. Double-click Internet Options. Options This opens the Internet Options dialog box. 4.
User Manual Hardware Setup When installing the router, the common practice is to have the router, the main computer, and phone jack in the same room. The room should also have enough electrical outlets to match your needs. Ethernet Connection In terms of data transfer speed, the Ethernet provides the fastest mode of connection between the router and the computer. To connect through Ethernet: 1.
User Manual signals and eliminates the noise. To setup the telephone POTS Splitter: 1. Locate the phone jack in your house. 2. Insert the POTS Splitter into the phone jack. 3. Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other end into the telephone. 2. Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other end into the Ethernet port in your computer. 3.
User Manual For Macintosh Unlike in Windows, Macintosh computers require that you install the USB driver first before connecting the router. To install the USB driver for Mac: 1. Insert the Resource CD into your CD-ROM. This displays the CD icon on your desktop. 2. Double-click the CD icon. icon This opens a screen displaying the CD contents. 3. Double-click the Mac folder. 4. Double-click USBCDCEthernetv1_2.pkg. USBCDCEthernetv1_2.pkg 5.
User Manual About the Web Interface The Web Manager is used to configure the router settings. Accessing the Web Manager To access the Web Manager: 1. Open a browser. 2. Enter the router’s IP Address. The default IP Address is 192.168.1.1. 192.168.1.1 3. When authentication is enabled, the log in page will appear. In the login page, enter the Username and Password. Password The default Username and Password is admin. 4. Click Login.
User Manual Commands Save Setting Click to permanently apply configuration changes. Restart Router Restarts the router Menus There are five menus in the web interface.
User Manual Basic Menu The Basic Menu provides the Home, Quick Start, LAN Configuration, and Diagnostics links.
User Manual Home The Home page provides a one-page summary about the Connection Information, Router Information, and Local Network settings. Connection Information The Connection Information pane gives you an idea about the status of your Internet connection. This pane includes a Connect/Disconnect button. When clicked, the router makes an attempt to connect to the Internet using the parameters saved in the router.
User Manual LAN Configuration LAN Group Configuration allows you to configure settings for each LAN group. Notice that you can also view the status of advanced services that can be applied to a LAN group. Green indicates that the service is enabled, while red indicates that the service is disabled.
User Manual Diagnostics Diagnostic Test is used for investigating whether the router is properly connected to the WAN Network. This test may take a few seconds to complete. To perform the test, select your connection from the list and press the Test button. Before running this test, make sure you have a valid DSL link. To run diagnostic test: 1. Select the Basic Menu and then click Diagnostics. Diagnostics This opens the Diagnostics page. 2. Click Test.
User Manual Ping Test Once you have your router configured, it is a good idea to make sure you can ping the network. If you can ping an IP on the WAN side successfully, you should be able to surf the Internet. To perform a ping test: 1. Select the Basic Menu and then click Diagnostics. Diagnostics 2. Click Ping Test. Test This opens the Ping Test page. 3. Change or leave the default settings of the following fields: Enter the IP address to ping Packet size Number of echo request 4. Click Test.
User Manual Advanced Menu The Advanced mode provides advanced configuration settings for existing connections. At least one WAN connection must be configured before implementing advanced WAN configuration features. At least one LAN group must be defined before implementing advanced LAN configuration features.
User Manual WAN Wide Area Network (WAN) is the source of your Internet connection. New Connection Your router can support up to eight different connections. If you have multiple virtual connections, you may need to utilize the static routing capabilities of the modem to pass data correctly.
User Manual PPPoE Connection PPP, or point-to-point protocol, is a method of establishing a network connection/session between network hosts. PPPoE is a protocol for encapsulating PPP frames in Ethernet frames and is described in RFC 2516. PPPoE provides the ability to connect to a network of hosts over a simple bridging access device to a remote access concentrator. With this model, each router uses its own PPP stack.
User Manual PPPoA Connection PPPoA is also known as RFC 2364. It is a method of encapsulating PPP packets in ATM cells that are carried over the DSL line. PPP, or point-to-point protocol, is a method of establishing a network connection/session between network hosts. It usually provides a mechanism of authenticating users. Logical link control (LLC) and virtual circuit (VC) are two different methods of encapsulating the PPP packet.
User Manual Static Connection Static connection type is used whenever a known static IP address is assigned to the router. Additional addressing information such as the subnet mask and the default gateway must also be specified. Up to three Domain Name Server (DNS) addresses can be identified. These servers resolve the name of the computer to the IP address mapped to it and thus enable you to access other web servers by typing the symbolic name (host name).
User Manual DHCP Connection DHCP allows the router to automatically obtain the IP address from the server. This option is commonly used in when the IP is dynamically assigned and is not known prior to assignment.
User Manual Bridged Connection Setup A pure bridged connection does not assign any IP address to the WAN interface. NAT and firewall rules are not enabled. This connection method makes the router act as a bridge for passing packets between the WAN interface and the LAN interface.
User Manual ADSL Modulation ADSL Modulation allows you to select any combination of DSL training modes. Leave the default value if you are unsure or the service provider did not provide this information. In most cases, this screen should not be modified.
User Manual Connection Scan This feature helps users to detect the PVC settings provided by the service provider. Before the router can begin scanning the connection, the telephone line has to be plugged into the router. Connection Scan To perform connections scan: 1. Select the Advanced Menu. Menu 2. Select WAN > Connection Scan. Scan 3. Click Scan.
User Manual LAN The router is preconfigured to automatically provide IP addresses to all the computers in the Local Area Network (LAN). Your router allows you to create and configure LAN groups. LAN Configuration The router can support up to two LAN groups through different physical interfaces. These interfaces include: Ethernet USB You can use other LAN interfaces to a group except for the Ethernet interface, which is assigned to LAN group 1.
User Manual To configure the LAN groupings: 1. Select the Advanced Menu Menu. nu 2. Select LAN > LAN Configuration. Configuration 3. Select USB in LAN group 1 and then click < Remove. Remove No packets will be sent to the USB interface because it does not belong to any LAN group. 4. Select USB from Interfaces and then click Add > under LAN group 2. 2 Just like in LAN group 1, Configure will appear in LAN group 2 to allow the definition of additional configurations. 5.
User Manual LAN Group Configuration LAN Group Configuration allows you to configure settings for each LAN group. Notice that you can also view the status of advanced services that can be applied to a LAN group. Green indicates that the service is enabled, while red indicates that the service is disabled. LAN Group Configuration Category Field Unmanaged Description Unmanaged is a state when the LAN group is not configured and no IP address has been assigned to the bridge.
User Manual PPP IP Address Enables/disables PPP unnumbered feature. IP Address The IP address should be different but within the same subnet as the WAN-side IP address. Use the following Static IP This field enables you to change the IP address of the address router. IP Address The default IP address of the router (as shown) is 192.168.1.1. Netmask The default subnet mask of your router is 255.255.255.0. This subnet allows the router to support 254 users.
User Manual with the router if your host has DHCP enabled. End IP The End IP Address is where the DHCP server stops issuing IP addresses. The ending address cannot exceed a subnet limit of 254; hence the max value for the default gateway is 192.168.1.254. If the DHCP server runs out of DHCP addresses, users do not get access to network resources. If this happens, you can increase the Ending IP address (to the limit of 254) or reduce the lease time.
User Manual Assign ISP DNS, SNTP When you enable the DHCP server, the router dynamically assigns IP addresses to computers in the local network. The router provides its own LAN IP address (192.168.1.1) as both the gateway and the DNS server. The router has a choice of advertising its own IP address (192.168.1.1) as the DNS server or providing the DNS that was received from the WAN. This can be configured by enabling/disabling Assign ISP DNS SNTP on the LAN Group Configuration page.
User Manual To add LAN Clients: 1. Select Advanced Menu. Menu 2. Select LAN > LAN Clients. Clients This opens the LAN Clients page. 3. Select a LAN Connection, Connection and enter IP Address, Address Hostname, Hostname and MAC Address. Address 4. Click Apply. Apply 5. You can convert the dynamic into a static entry by clicking Reserve, Reserve and then click Apply. Apply 6. To temporarily implement the settings, click Apply. Apply 7. To make changes permanent, click Save Settings.
User Manual Applications Applications include: Universal Plug and Play (UPnP) Simple Network Timing Protocol (SNTP) Internet Group Management Protocol (IGMP) Proxy TR-068 WAN Access DNS Proxy Dynamic DNS Client Port Forwarding Bridge Filters Web Access Control Page 42 of 90
User Manual Universal Plug and Play Universal plug and play (UPnP), NAT, and firewall traversal allow traffic to pass through the router for applications using the UPnP protocol. This feature requires one active WAN connection. In addition, the computer should support this feature. In the presence of multiple WAN connections, select a connection on which the incoming traffic is present, for example, the default WAN connection. UPnP To configure UPnP: 1. Select Advanced. Advanced 2.
User Manual Simple Network Timing Protocol Simple network timing protocol (SNTP) is a protocol used to synchronize the system time to the public SNTP servers. It uses the UDP protocol on port 123 to communicate between clients and servers. SNTP To enable SNTP: 1. Check Enable SNTP. SNTP 2. Configure the following fields: Primary SNTP Server The IP address or the host name of the primary SNTP server. This can be provided by ISP or defined by user.
User Manual Polling Interval The amount of time between a successful connection with a SNTP server and a new attempt to connect to an SNTP server. Retry Count The number of times the router tries to connect to an SNTP server before it tries to connect to the next server in line. Time Zone The time zone in which the router resides. Day Light Select this option to enable/disable daylight saving time (DST). DST is not automatically enabled or disabled.
User Manual IGMP Proxy IP hosts use Internet group management protocol (IGMP) to report their multicast group memberships to neighboring routers. Similarly, multicast routers use IGMP to discover which of their hosts belong to multicast groups. Your router supports IGMP proxy that handles IGMP messages. When enabled, your router acts as a proxy for a LAN host making requests to join and leave multicast groups, or a multicast router sending multicast packets to multicast groups on the WAN side.
User Manual Non-group members may send UDP datagrams to the host group. Multicasting is useful when the same data needs to be sent to more than one device. For instance, if one device is responsible for acquiring data that many other devices need, then multicasting is a natural fit. Note that using multicasting as opposed to sending the same data to individual devices uses less network bandwidth. The multicast feature also enables you to receive multicast video streams from multicast servers.
User Manual TR-068 WAN Access The TR-068 WAN Access page enables you to give temporary permission to someone (such as technical support staff) to be able to access your router from the WAN side. From the moment the account is enabled the user is expected to log in within 20 minutes, otherwise the account expires. Once the user has logged in, if the session remains inactive for more than 20 minutes, the user will be logged out and the account expires.
User Manual Syntax: Syntax http(s)://WAN IP of router:Port Number 7. Click Apply to temporarily apply the settings. 8. To make changes permanent, click Save Settings. Settings DNS Proxy This feature allows the user to select the Domain Name Server (DNS) Server Priority as well as enter IP addresses for primary DNS and secondary DNS. DNS Proxy To select the DNS Server Priority: 1. Select Advanced. Advanced 2. Select Application > DNS Proxy. Proxy 3. Select the DNS Server Priority.
User Manual 4. Click Apply to temporarily apply settings. 5. To make changes permanent, click Save Settings. Settings Dynamic DNS Client Dynamic DNS allows the user to register with a Dynamic DNS Provider. The Dynamic DNS will be linked with the WAN IP of the router even after the ISP update the WAN IP to another IP address. It can be useful in web hosting and FTP services.
User Manual User Name Password Domain Name 4. Click Apply to temporarily apply the settings. 5. To make changes permanent, click Save Settings. Settings Port Forwarding Port forwarding (or virtual server) allows you to direct incoming traffic to specific LAN hosts based on a protocol port number and protocol. Using the Port Forwarding page, you can provide local services (for example, web hosting) for people on the Internet or play Internet games. Port forwarding is configurable per LAN group.
User Manual To configure port forwarding: 1. Select Advanced. Advanced 2. Select Application > Port Forwarding. Forwarding 3. Select WAN Connection, Connection LAN Group, Group and LAN IP. IP If the desired LAN IP is not available in the LAN IP drop-down menu, you can add it using the LAN Client page, page which is accessed by clicking New IP. IP 4. Select the available rules for a given category and click Add to apply the rule for this category.
User Manual DMZ Settings Setting a host on your local network as demilitarized zone (DMZ) forwards any network traffic that is not redirected to another host via the Port Forwarding feature to the IP address of the host. This opens the access to the DMZ host from the Internet. This function is disabled by default. By enabling DMZ, you add an extra layer of security protection for hosts behind the firewall. To enable DMZ Settings: 1. On the Port Forwarding page, select Enable DMZ.
User Manual Bridge Filters The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge filtering is enabled, each frame is examined against every defined filter rule in sequence. When a match is found, the appropriate filtering action (allow or deny) is performed. Up to 20 filter rules are supported with bridge filtering. Bridge Filters To configure Bridge Filters: 1. Select Advanced. Advanced 2. Select Application > Bridge Filters.
User Manual Web Access Control The Web Access Control page allows you to access the router via the web from a remote location like your home or office. Web Access Control To configure Web Access: 1. Select Advanced Menu. Menu 2. Select Application > Web Access Control. Control 3. Select Enable. Enable 4. Select the connection used to connect to the Internet in the Choose a connection. connection 5. Configure the following fields: Remote Host IP Remote Netmask Redirect Port 6.
User Manual Quality of Service Quality of service allows network administrators to configure the routers to meet the real time requirements for voice and video. Different networks use different QoS markings like: ToS network: ToS bits in the IP header VLAN network: priority bits in the VLAN header DSCP network: uses only 5 bits of the CoS WLAN: WLAN QoS header. The QoS framework is supported on all the above domains.
User Manual o Egress Mappings (CoS => Domain) o Untrusted mode (default) Shaper Egress For packets going out of the router, the markings (CoS) need to be translated to the mappings understood by the network domains. The reverse CoS and domain mapping is configured using the Egress. To access Egress, Egress select the Advanced Menu and then select QoS > Egress.
User Manual No Egress Mode The default Egress page setting for all interfaces is No Egress. In this mode, the domain mappings of the packets are untouched.
User Manual Layer 2 The Egress Layer 2 page allows you to map the CoS of an outgoing packet to user priority bits, which is honored by the VLAN network. Again, this feature is only configurable on the WAN interfaces as VLAN is only supported on the WAN side in the current release.
User Manual Layer 3 Egress Layer 3 enables you to map CoS to ToS so that the priority marking of outgoing packets can be carried over to the IP network. Layer 3 Ingress Ingress enables you to configure QoS for packets as soon as they come into the router. The domain mappings are converted to CoS (the common language) so that the priority marking is carried over.
User Manual Untrusted Mode Untrusted is the default Ingress page setting for all interfaces. In this mode, no domain mapping is honored in the router. All packets are treated as CoS6 (best effort).
User Manual Layer 2 Layer 2 allows you to map an incoming packet with VLAN priority to CoS. This feature is only configurable on the WAN interfaces as VLAN is only supported on the WAN side in the current software release.
User Manual Layer 3 The Layer 3 page allows you to map ToS bits of incoming packets from the IP network to CoS for each WAN/LAN interface.
User Manual Static The Ingress - Static page enables you to configure a static CoS for all packets received on a WAN or LAN interface.
User Manual QoS Shaper Configuration The Shaper Configuration page is accessed by selecting Shaper on the Advanced main page. Three shaper algorithms are supported: HTB Low Latency Queue Discipline PRIOWRR QoS Shaper Configuration Note: Egress TCA is required if shaper is configured for that interface. Of the three shaping algorithms available on the Shaper Configuration page, only one can be enabled at a time. An example of each configuration is given as follows.
User Manual Example 1: HTB Queue Discipline Enabled In the example below, HTB Queue Discipline is enabled. The PPPoE1 connection has a total of 300 Kbps of bandwidth, of which 100 Kbps is given to CoS1 and another 100 Kbps is given to CoS2. When there is no CoS1 or CoS2 packets, CoS6 packets have the whole 300 Kbps of bandwidth.
User Manual Example 2: Low Latency Queue Discipline Enabled In this second example, Low Latency Queue Discipline is enabled. CoS1 is not rate controlled (hence the field is disabled). CoS2 takes 100 Kbps when there is no CoS1 packet. CoS6 has 300 Kbps when there is no CoS1 or CoS2 packets. This is similar to the HTB queue discipline as they are both rate-based algorithm, except that CoS1 is handled differently.
User Manual Example 3: PRIOWRR Enabled In this third example, PRIOWRR is enabled. Since PRIOWRR operates only on the number of packets being transmitted, the max rate field has been disabled. Only percentage can be assigned to the CoS2 - CoS6. CoS1 is not rate controlled (hence the field is not displayed). When there is no CoS1 packet, CoS2, CoS3, CoS4 each has 10 percent, and CoS6 has 70 percent.
User Manual Policy Routing Configuration The Policy Routing Configuration page is accessed by selecting Policy Routing Configuration on the Advanced home page under QoS. This page enables you to configure policy routing and QoS. The policy routing configuration is discussed as follows. The QoS configuration is discussed in ‘‘Ingress Payload Database Configuration’’. Policy Routing Configuration Currently routing algorithms make decision based on destination address, i.e.
User Manual Destination port Incoming interface DSCP Page 70 of 90
User Manual Routing Static Routing If the ADSL Router is connected to more than one network, you may need to set up a static route between them. A static route is a pre-defined pathway that network information must travel to reach a specific host or network. You can use static routing to allow different IP domain users to access the Internet through the ADSL Router. Static Routing The New Destination IP is the address of the remote LAN network or host to which you want to assign a static route.
User Manual Routing Table Routing Table displays the information used by routers when making packet forwarding decisions. Packets are routed according to the packet's destination IP address.
User Manual System Password Anyone who can access the web interface can be considered an Administrator. To restrict access to the web interface, you need to set the System Password. To change the System Password: 1. Select Advanced Menu 2. Click System Password. Password This opens the System Password page. 3. Select Enable Authentication. Authentication 4. Enter your password. 5. Reenter your password in the Confirm Password text box. 6. To temporarily implement the settings, click Apply. Apply 7.
User Manual Firmware Update When updating the firmware, make sure you are using the correct file. Once the upgrade is complete the router will reboot. You will need to log back into the router after the firmware upgrade is completed. To update the firmware: 1. Select the Advanced Menu and then click Firmware Upgrade. Upgrade This opens the Firmware Upgrade page. 2. Click Browse and then locate the firmware file. 3. Click Update Gateway. Gateway The update may take a few minutes.
User Manual Security Menu Security Menu allows you to configure security tools like IP Filters and LAN Isolation.
User Manual IP Filters IP filtering allows you to block specific applications/services based on the IP address of the LAN device. In this page, you can block specific traffic (for example, block web access) or any traffic from a host on your local network. A database of predefined IP filters allows you to apply one or more filtering rules to one or more members of a defined LAN group. You can view the rules associated with a predefined filter and add the available rules for a given category.
User Manual 5. The Rule Management page opens for you to create new rules. Enter Rule Name, Name Protocol, Protocol Port Start, Start Port End, End and Port Map, Map and then click Apply. Apply The rules you create will appear in the Available Rules pane in the User category. You can view or delete the rules you create. 6. Continue to add rules as they apply from each category using the Add button. 7. To temporarily implement the changes, click Apply. Apply 8.
User Manual LAN Isolation LAN isolation allows you to disable the flow of packets between two LAN groups. This allows you to secure information in private portions of the LAN from other publicly accessible LAN segments. LAN Isolation To enable LAN Isolation: 1. Select the Security Menu and then click LAN Isolation. Isolation 2. On the LAN Isolation page, select the checkbox for Disable traffic between LAN group 1 and LAN group 2. 2 3. To temporarily implement the changes, click Apply. Apply 4.
User Manual Status Menu The Status Menu provides the status for different connections or interfaces.
User Manual Modem Status Product Information Connection Status Connection Status displays the type of protocol, the WAN IP address, the connection state and the duration of your Internet connection. Connection Status To view the Connection Status, select the Status Menu and then click Connection Status.
User Manual System Log System Log displays the router log. Depending on the severity level, the information log will generate log reports to a remote host if remote logging is enabled. System Log To view the System Log, select the Status Menu and then click System Log.
User Manual Remote Log Remote Log allows you to forward all logged information to one (or more) remote computer. The type of information forwarded to the remote computer depends on the Log level. Each log message belongs to a certain log level, which indicates the severity of the event. When you configure remote logging, you must specify a severity level.
User Manual Error Error conditions that generally have less serious consequences than errors in the emergency, alert, and critical levels.. Warning Conditions that warrant monitoring. Notice (Default) Conditions that are not errors but might warrant special handling. Info Events or non-error conditions of interest. Debug Debug Software debugging message. Specify this level only when directed by a technical support representative. 3.
User Manual Network Statistics The Ethernet, USB, and DSL line statuses are displayed in this page.
User Manual Network Statistics - DSL To view the Network Statistics, select the Status Menu and then click Network Statistics. Statistics DDNS Update Status DDNS Update Status displays the WAN connection status. By default, DDNS is disabled. When the DDNS is enabled, the DDNS client updates every time the router gets a new IP address. DDNS Update Status To view the DDNS Update Status, select the Status Menu and then click DDNS Update Status.
User Manual DHCP Clients DHCP Clients displays the MAC address, IP address, host name, and lease time. To view the DHCP Clients, select the Status Menu and then click DHCP Clients.
User Manual QoS Status This page displays the Quality of Service and the packet statistics. To view the QoS Status, select the Status Menu and then click QoS Status.
User Manual Modem Status This page displays the model status. Modem Status To view the Modem Status, select the Status Menu and then click Modem Status. Status Product Information This page displays the product information and software versions. Product Information To view the Product Information, select Status and then click Product Information.
User Manual Help Menu The Help page provides documentation for various topics like Firewall, Bridge Filters, LAN Clients, LAN Group Configuration, PPP Configuration, UPnP, IP QoS, and Routing Information Protocol. To access Help, select the Help Menu.
User Manual Safety Precautions Do not open, service, or change any component. Only qualified technical specialists are allowed to service the equipment. Observe safety precautions to avoid electric shock Check voltage before connecting to the power supply. Connecting to the wrong voltage will damage the equipment. Copyright © 2007. All rights reserved.
