KIDAtalk Hardware and Software Documentation KIDAtalk – talk all you want For subscription, CONTACT us at: 158 Victoria Parade. Suva. P.o. Box 59, Suva, Fiji Islands. Phone: 679 - 331 5511 Fax: 679 - 331 2239 Email: info@kidanet.com.
KIDAtalk Hardware and Software Documentation KIDAtalk Soft phone Minimum System Requirements A PC running Windows ME/2000sp4/XPSP2/Vista: Hardware requirement: At least Intel Celeron 300 CPU with 32MB for Windows ME, 128MB for Windows 2000, 256 for Windows XP. A full-duplex sound card with a microphone and speakers, or any USB phones. Installed latest DirectX (9.0 at least) is strongly recommended; you can check it by dxdiag.exe. Please use the latest drivers for your soundcards and USB phones.
KIDAtalk Hardware and Software Documentation To make Local calls 1. To make a local call to either a mobile or to a fixed line, simply key in the phone number and click on the dial pad or on your keyboard. 2. You will be able to see from the dialer screen that the phone is ringing on the receiving end. The call is connected once the receiver picks up the call.
KIDAtalk Hardware and Software Documentation To make International Calls/IDD 1. To make international calls, you would need to input a “00” prefix in front of the country code and the number that you wish to dial to. (For example, to call Sydney in Australia, you need to dial “00” followed by country code for Philippines “61”, area code for Sydney “2” and the number you wish to dial to, such as as 00-61-2-XXXXXXXX. Click on “Dial” button to call. To terminate a call 1.
KIDAtalk Hardware and Software Documentation To enable DND – Do Not Disturb 1. Click “DND” on the softphone. Once this is enabled, all calls will be routed to the Voicemail. There will be a pop-up window from the softphone that will reflect the called party’s number if the caller ID is not blocked.
KIDAtalk Hardware and Software Documentation To control microphone level and sound level 1. To control the microphone level, adjust the control on the left side of the softphone. 2. To control the sound level, adjust the volume control on the right side of the softphone. To access Voicemail 1. When a voicemail is received, the Voicemail icon will turn red. Click on the icon to listen to your voicemails.
KIDAtalk Hardware and Software Documentation There are a few ways to add a contact to the phonebook. 1. From the dialed number, simply right-click your mouse. There will be an option for the number to be added to your phonebook. Key in the relevant details and click ok. 2. Another way is to select the number – either dialed, received or missed call and right click on your mouse. You will see the same pop-up window for inputting the details.
KIDAtalk Hardware and Software Documentation ATA – ANALOG TELEPHONE ADAPTOR Minimum System Requirements • An active Internet connection • An active service subscription with KIDAtalk • You regular telephone set with RJ-11 telephone wire LINKSYS SPA3102 Voice gateway with Router 8
KIDAtalk Hardware and Software Documentation 9
KIDAtalk Hardware and Software Documentation Connecting the Voice Gateway 1. Power off your network devices, including your modem and PC. 2. If you have traditional phone service, connect the RJ-11 phone cable (included) to the Voice Gateway’s LINE port and your telephone wall jack. 3. Connect one end of a different RJ-11 phone cable to the Voice Gateway’s PHONE port. Connect the other end to your analog telephone or fax machine. IMPORTANT: Do not connect the PHONE port to a telephone wall jack.
KIDAtalk Hardware and Software Documentation SNOM300/Aztech IP150 – IP Telephone DELIVERY CONTENT • Base unit with display and keypad • Handset and Handset cradle • Power Supply QUICK INSTALLATION GUIDE 11
KIDAtalk Hardware and Software Documentation 12
KIDAtalk Hardware and Software Documentation SETTING UP SNOM 300/IP150 – IP PHONE CONNECTING SNOM 300/IP150 – IP PHONE 13
KIDAtalk Hardware and Software Documentation 14
