User manual

User Manual
Page 22 of 47
The key settings for adding a new Static Route are explained:
Destination IP Address
Destination IP Address Destination IP Address
Destination IP Address Enter the network address to which the data
packets are to be sent.
Network Mask
Network Mask Network Mask
Network Mask Enter the subnet mask for this destination.
Gateway
Gateway Gateway
Gateway If you wish to use a specific gateway to reach the
destination network, select this checkbox and then enter the IP
address of the gateway.
Interface
Interface Interface
Interface If you wish to use a particular WAN interface, select the
checkbox and select the interface.
Click Apply to take effect the settings.
To delete the entry from the routing table list, click its corresponding Delete
button.