User manual

User Manual
Page 15 of 48
Step 3
Press Simple Connect for two seconds on HomePlug X. After you release the button, the Power
LED will blink. If the Power LED did not blink, press Simple Connect again for two seconds.
Pairing between two devices are only given two minutes upon pressing the Simple Connect
button for two seconds on HomePlug Y. After pressing Simple Connect on HomePlug Y, make
sure to press Simple Connect on HomePlug X within two minutes to ensure a successful
connection, otherwise repeat steps 2 and 3 until the LEDs of both devices switch OFF and on
twice, indicating that they are paired successfully with one another.
Note: Do not press Simple Connect for more than two seconds
HomePlug X
HomePlug Y