User manual

User Manual
Page 51 of 61
Samba Server
The USB port on the DSL1015EN(L) is capable of sharing the contents of your USB storage device to
the network. The following steps should be accomplished to share your files on the network.
USING THE USB PORT WITH USB STORAGE DEVICES
1. Ensure that the DSL1015EN(L) is OFF, connect the USB storage device and switch it ON.
2. Once the DSL1015EN(L) is ready, you can access the files from your windows explorer, this
can be done by clicking on the Start Button> Run.
3. On the Open box, type: \\192.168.1.1 and click on OK. If there is a prompt for a username and
password, type admin for both the username and password.
4.
From windows explorer, you will see a folder called sda1, this is the folder containing the files
from your USB storage device.
SAFELY REMOVING THE USB STORAGE DEVICE FROM THE DSL1015EN
1. Open you Internet browser and log on to http://192.168.1.1, on the authentication page, type
admin for both the username and password.
2. Click on USB Device under Advanced and click on the Umount button from the USB
Information page.
3. You can safely remove the device once you see the Mount button displayed on the table for
USB Information.
Note:
The USB Storage feature on the DSL1015EN(L) can only support devices that are formatted with FAT/FAT32 file systems.
NTFS and other file systems are currently not supported.