User manual

User Manual
Page 19 of 61
To use Quick Setup:
1. Open your browser.
2. Enter 192.168.1.1 and then press Enter.
3. Enter the User name and Password, and then click OK. The default User name and Password
is
admin
.
4. Select Quick Setup.
5. Enter the connection settings
a. Select a Protocol
b. Select an Encapsulation Mode
c. Enter the PPP Username and Password
d. Enter PVC Settings
e. Check Enable Wireless
f. Enter an SSID
6. Click Save/Reboot.
The router will save your settings and reboot. It will connect to the Internet after the reboot.
When the connection is established, the Internet LED on the router lights or blinks green.