User manual

User Manual
Page 13 of 61
Remove or Disable Conflicts
To make sure the router installation moves on smoothly, you need to remove or disable conflicts that
may interfere the installation. Probable conflicts may include:

Internet sharing applications

Proxy software

Security software

TCP/IP settings

Internet properties
 Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the router installation.
These should be removed or disabled before you install and configure the router.
If you have any of the following or similar applications installed on your computer, remove or disable
them according to the manufacturer’s instructions.
Internet Sharing Applications Proxy Software Security Software
Microsoft Internet Sharing WinGate Symantec
WinProxy Zone Alarm
Configuring TCP/IP Settings
Use the default TCP/IP settings to allow the router to provide a network address to the computer,
To set the TCP/IP properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in your
computer.
3. Right-click LAN and then select Properties. This opens the Local Area Connection Properties
dialog box.