User manual

User Manual
Page 19 of 56
Connecting to the Internet
You can use the Web Interface to setup your Internet connection.
Connecting Via Quick Setup
To connect to the Internet via the Web Interface:
1. Open your browser.
2. Enter 192.168.1.1 and then press Enter.
3. Enter the User name and Password, and then click OK. The default User name and Password
is admin.
4. Select Quickstart.
5. Enter the connection settings
a. Select a Protocol and Encapsulation Mode (PPPoE - LLC is commonly used unless
specific otherwise by your Internet Provider)
b. Enter PVC Settings (Please check with your Internet Provider for the correct VCI/VPI)
c. Enter the PPP Username and Password (Enter your Internet Username and Password
provided by your Internet Provider in the PPP Username and Password field)
6. Click Save/Apply.