User manual

User Manual
Page 18 of 56
Setup the Device
When installing the router, find an area where there are enough electrical outlets for the router, the
main computer, and your other computer devices.
To setup the router:
1. Connect the POTS Splitter into the telephone jack.
2. Use a telephone cable to connect to the router’s DSL port and the POTS Splitter’s modem port.
POTS Splitter
Your phone line carries with it both phone calls and Internet signals. When you are using the
Internet, the connection produces high-pitched tones that can affect your voice calls when using the
phone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and
eliminates the noise.
To setup a telephone on the POTS Splitter:
Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other end
into the telephone.
3. Plug one end of the Ethernet cable from any of the router’s four ETHERNET ports and then
plug the other end into the Ethernet port in your computer.
4. Connect the power adapter from the router’s 12V 1A DC port into the electrical outlet.
5. Press the “ON” button at the back of the router to turn on the power.