User manual

User Manual
Page 18 of 50
4. Connect the power adapter from the router’s 12V 1.0A DC port into the electrical
outlet.
5. Press ON.
Wall Mount Feature
The Aztech DSL1000EW(L) provides a wall-mount feature to affix the router to a wall.
To setup the router to a wall-mount:
1. Identify the wall where you would like to mount the router. Ensure that it is
sturdy and within reach of a power outlet and your telephone line socket for the
DSL connection.
2. Make a mark for 2 holes 127mm apart on the wall and drill the screws leaving
5mm of the head exposed.
3. Once the screws are in place, you may latch the wall mount sockets on the
bottom of your router until it is firmly attached.
NOTE
NOTENOTE
NOTE:
::
: Adjust the screws if you are unable to latch the router.