User`s guide

Figure 12 (Management IP address)
The apply button will temporarily save this connection. To make the change permanent you need
to click on Save Settings (at the side of the page). At the system commands page, click on Save
All.
4.5.3 Firewall/NAT Services
You can enable or disable Firewall and NAT by clicking on Setup and under LAN Setup, select
Firewall/NAT Services. By unselecting the “Enable Firewall and NAT Services” button the firewall
and NAT services is disabled for all WAN connections.
The apply button will temporarily save this connection. To make the change permanent you need
to click on Save Settings (at the side of the page). At the system commands page, click on Save
All.
4.6 Advanced (for advance user only)
The ADSL Router supports a host of advanced features. For basic ADSL Router functionality,
the user does not need to utilize these advanced features. The features help with routing,
security, port configuration, and plug and play capability.
- 21 -