User manual

User Manual
Page 47 of 57
This configuration can be easily set using the Applications, VPN Lite page. On this page
you can configure the VPN Lite node. You have the choice of setting this function on The
ADSL port, ETH WAN port, or disabling it. Due to routing constraints, you cannot have it
active on both WAN types at the same time, though you can configure both and use the utility
to switch between them, if required. Our ADSL connection will automatically be set up
using PVC1 and the Eth WAN connection will be set up on PVC6. Although you will be able
to make changes in the Internet page to these PVC configuration, we do not suggest that you
do this since the routing table will not be updated accordingly. We suggest that you only use
this utility to make any changes to the VPN Lite configuration.
To configure VPN lite on the ADSL interface, select Configure VPN Lite on ADSL and
enter the details provided.
Click Apply to save