User manual

User Manual
Page 38 of 57
Click Apply to commit the wireless settings.
Security
This page allows you to set the network authentication method, selecting data encryption,
specify whether a network key is required to authenticate to this wireless network and specify
the encryption strength. By default, the router uses WPA-PSK/WPA2-PSK security. This is a
good level of security that requires a user to have a pre-defined key (password) in order to
connect. Your router is supplied with its own unique key, which you will see in on this page.
Should you wish to make this something more memorable, you are able to make the change
on this page. Click "Apply" to commit wireless security settings.
MAC Filter
This page allows you to set a filter to Allow or Deny specific wireless clients by entering the
MAC address and selecting the Access Control List mode. To add a wireless client to this list,
Enable the WLAN MAC filter checkbox, select from Access Control List Mode whether
you wish to allow or block the clients listed, and enter the MAC address of the relevant