User manual

User Manual
Page 14 of 57
Connecting to the Internet
You can either use the utility on the provided CD to configure your router (Windows OS
only) or you can use the built in Web Interface to setup your Internet connection.
To use the CD utility, you should insert the CD, and follow the click the install button.
Otherwise, for any operating system, continue as follows:
Connecting Via Setup Wizard
To connect to the Internet via the User mode GUI:
1. Launch your chosen web browser (Firefox, Internet Explorer, Safari etc) and input
10.0.0.2 on the address bar.
2. If your router is in the Factory Default Reset state, the Setup wizard will
automatically be opened when you access the router. If the router has already been
configured, you will need to enter the username and password (default
username/password is admin/admin) and select the Wizard Tab.
3. Click Next to continue, or Cancel to exit utility.