User guide

ADSL2+ Ethernet USB Combo Router - User Guide
Page 57 of 67
4.5.23 Routing Table
Routing Table shows the information used by routers when making packet forwarding decisions.
Packets are routed according to the packet's destination IP address. See Figure 1-41.
Figure 1-41 : Routing Table
4.5.24 System Password
You can change your ADSL Router’s username and password by clicking on System Password.
You can also change the idle timeout; you will need to log back onto the ADSL Router once the
timeout expires. If you forget your password, you can press and hold the reset to factory defaults
button for 10 seconds (or more). The ADSL Router will reset to its factory default configuration
and all custom configurations will be lost. See Figure 1-42.
Figure 1-42 : System Password