Troubleshooting guide

7
ADSL USB Modem Easy Start
Step 3: Configuring the IP Settings
(For RFC 1577 users only)
3.1 Configuring the IP Settings - For Windows® XP
(Instructions are based on default Start menu option)
i. From your Windows taskbar, click Start > More Programs > Accessories >
Communications > Network Connections.
ii. From Other Places, click My Network Places. Right-click on the LAN Area
Connection and select Properties.
iii. Ensure that the field Connect Using indicates ADSL USB MODEM LAN
ADAPTER.
(This verification is important as you may have more than one Local Area Connection
icons installed in your system).
Select Internet Protocol (TCP/
IP) and click Properties.
iv. Click Use the following IP address.
Enter the addresses as given by
your ADSL Service Provider.
Click Use the following DNS
server addresses. Enter the
DNS server addresses as given
by your ADSL Service Provider.
Click OK. Click OK again to
close.
Restart your system when prompted.
You can start surfing the Internet by
launching your Internet Browser.