Troubleshooting guide

6
ADSL USB Modem Easy Start
Step 2: Setting Up ADSL USB Modem
With the "Hot Swap" feature in this modem, you can connect your modem to your
computer without having to power off your system!
Carry out the connections as illustrated.
2 For details on the usage of the Micro-Filter, please refer to the Frequently Asked Question &
Troubleshooting Guide, 'Do I need to use a Micro-Filter when using ADSL ?' on your Installation CD.
Your USB cable should be connected as illustrated above. Proceed with the rest
of the connections as follow:
Ê Connect one end of the telephone extension cable to the Line Jack on the
modem and the other end to a telephone wall socket.
Ë Connect a Micro-Filter
2
to the TEL Jack on the modem and then connect your
Telephone Set to the Micro-Filter. (The connection to the telephone set is optional.
The Micro-Filter is not required if you are not connecting to a Telephone Set).
For RFC 1483 users, this completes the setting up of your ADSL Modem. Please
refer to your ADSL Service Provider to install a third-party utility for dial-up to the
Internet.
For RFC 1577 users, please proceed to Step 3.
For RFC 2364 and 2516 users, please proceed to Step 4.
Telephone set
Telephone
wall socket
Telephone
extension cable
USB port
USB Port
TEL jack
LINE jack
Ë
Ê
USB cable
rear view of a PC
Micro-Filter
2