Troubleshooting guide

4
ADSL USB Modem Easy Start
Step 1: Installing Your
ADSL USB Modem Driver
If you have connected the Modem to your PC BEFORE installing the
driver, you will be prompted with the New Hardware Wizard.
Click Cancel at the prompt. Disconnect the USB cable from your Modem
and proceed with the following installation first!
v. At the following prompt,
click Finish to restart your
computer.
The following contains the driver installation instructions for the protocols RFC
1483 (Bridging), RFC 1577 (IPoA), RFC 2364 (PPPoA) and RFC 2516 (PPPoE).
You only need to install one of them, as determined by your ADSL Service Provider.
i. Power on your computer. Place the Installation CD on your CD-ROM Drive.
ii. From the Installation CD, go to the appropriate folder, either 'RFC1483',
'RFC1577', 'RFC2364' or 'RFC2516' (as determined by your ADSL Service
Provider) and double-click the file setup.exe.
iii. At the following screen, click Next.
iv. Allow some time for Windows to copy the required files.