Troubleshooting guide

ManualsBrandsAztech ManualsComputer equipmentADSL USB Modem

Windows® 98 Second Edition, Windows® Me, Windows® XP and Windows® 2000

supported

Easy Start

(

Read Me First)

Version 1.0

Protocols discussed

RFC 1483

RFC 1577

RFC 2364

RFC 2516

ADSL USB Modem

Contents...

About this Easy Start ............................................... 2

Safety Guidelines ..................................................... 2

Package.................................................................. 2

Minimum System Requirements ................................ 3

Front Indicators ....................................................... 3

Step 1: Installing Your ADSL USB Modem Driver ........ 4

Step 2: Setting Up ADSL USB Modem ...................... 6

Step 3: Configuring the IP Settings (For RFC 1577

user only) ................................................... 7

3.1 For Windows® XP ............................ 7

3.2 For Windows® Me / Windows® 98

Second Edition ................................. 8

3.3 For Windows® 2000 ....................... 10

Step 4: Dial-Up to the Internet (for RFC 2364 and

RFC 2516 users) ....................................... 11

Summary of content (12 pages)

PAGE 1
ADSL USB Modem Easy Start (Read Me First) Version 1.0 Protocols discussed RFC 1483 RFC 1577 RFC 2364 RFC 2516 Contents... About this Easy Start ............................................... 2 Safety Guidelines ..................................................... 2 Package .................................................................. 2 Minimum System Requirements ................................ 3 Front Indicators .......................................................
PAGE 2
ADSL USB Modem Easy Start Product warranty does not apply to damage caused by lightning, power surges or wrong voltage. Safety Guidelines • • • • Keep the modem away from fluid, direct sunlight and excessive heat. During times of lightning strike/thunderstorm, do not use the modem. This product is for use only in UL Listed computers. To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
PAGE 3
ADSL USB Modem Easy Start Minimum System Requirements • • • • • • IBM PC -based computer with Pentium® 233 processor 32MB RAM 20MB hard disk space (system files and modem driver only) A free USB Port CD-ROM drive Windows® 98 Second Edition / Windows® Me / Windows® XP / Windows® 2000 Front Indicators The indicators show the status for the following: Power Power ADSL Data ADSL Data : Lights up when power is supplied via the USB port from your PC : Lights up when the ADSL line is established : Blinks wh
PAGE 4
ADSL USB Modem Easy Start Step 1: Installing Your ADSL USB Modem Driver If you have connected the Modem to your PC BEFORE installing the driver, you will be prompted with the New Hardware Wizard. Click Cancel at the prompt. Disconnect the USB cable from your Modem and proceed with the following installation first! The following contains the driver installation instructions for the protocols RFC 1483 (Bridging), RFC 1577 (IPoA), RFC 2364 (PPPoA) and RFC 2516 (PPPoE).
PAGE 5
ADSL USB Modem Easy Start vi. After system reboot, click OK at the USB Warning. Connect one end of the USB cable ( the Modem and the other end ( ) to the USB Port on ) to the USB port on your computer. (See the illustration at Step 2). vii. For Windows® 98 Second Edition users, you may be prompted for your Windows CD-ROM. Replace the Installation CD on your CD-ROM drive with Windows 98 Second Edition CD-ROM. In the text box, enter the path (example D:\win98) of your Windows CD-ROM and click OK. viii.
PAGE 6
ADSL USB Modem Easy Start Step 2: Setting Up ADSL USB Modem With the "Hot Swap" feature in this modem, you can connect your modem to your computer without having to power off your system! Carry out the connections as illustrated. USB Port LINE jack TEL jack Ë Micro-Filter Telephone set 2 Telephone wall socket USB cable Ê Telephone extension cable USB port rear view of a PC Your USB cable should be connected as illustrated above.
PAGE 7
ADSL USB Modem Easy Start Step 3: Configuring the IP Settings (For RFC 1577 users only) 3.1 Configuring the IP Settings - For Windows® XP (Instructions are based on default Start menu option) i. ii. iii. From your Windows taskbar, click Start > More Programs > Accessories > Communications > Network Connections. From Other Places, click My Network Places. Right-click on the LAN Area Connection and select Properties. Ensure that the field Connect Using indicates ADSL USB MODEM LAN ADAPTER.
PAGE 8
ADSL USB Modem Easy Start 3.2 i. Configuring the IP Settings - For Windows® Me / Windows® 98 Second Edition From your Windows desktop, right-click on the Network Neighborhood icon. Select Properties. From the Configuration tab, select TCP/IP-> ADSL USB MODEM LAN ADAPTER and click Properties. ii. iii. Select the IP Address tab. Click Specify an IP address. Enter the addresses as given by your ADSL Service Provider. iv. Select DNS Configuration tab. Click Enable DNS. Enter the Host name.
PAGE 9
ADSL USB Modem Easy Start v. Select the Gateway tab. Enter the New Gateway address assigned by your ADSL Service Provider and click Add. vi. Select Advanced tab. Select Yes from the Value drop-down list and click OK. You can start surfing the Internet by launching your Internet Browser.
PAGE 10
ADSL USB Modem Easy Start 3.3 i. ii. Configuring the IP Settings - For Windows® 2000 From your Windows desktop, right-click on the icon My Network Places. Select Properties. At the Network and Dial-up Connections window, right-click on the Local Area Connection icon and select Properties. Ensure that the field Connect Using indicates ADSL USB MODEM LAN ADAPTER. (This verification is important as you may more than one Local Area Connection icons installed in your system).
PAGE 11
ADSL USB Modem Easy Start Step 4: Dial-Up to the Internet (for RFC 2364 and RFC 2516 users) For RFC 1483 users, please install a third-party dial-up utility for your modem as required by your ADSL Service Provider. For RFC 1577 users, you can start surfing the Internet by launching your Internet Browser. i. ii. iii. To connect to the Internet, double-click on the shortcut icon ADSL USB MODEM DIAL-UP on your Windows desktop.