User`s manual

Chapter 5  Testing the Modem Card

5.2.2 Setting the Country

Ensure that the country setting is correct for your location. In some cases, the

country is set to match the Operating System selected and re-selection is

required to match your exact location. To change the current setting, do the

following:

1. From the Windows taskbar, click Start> Settings>Control Panel.

2. Double-click on the HSF Modem Country Select icon.

3. Change it to the country that you are currently in.

5.3 Windows NT

4.0

5.3.1 Testing the modem

1. From the Windows taskbar, click Start > Programs > Accessories >

HyperTerminal > HyperTerminal.

2. Key in the required information prompted by the dialog boxes.

3. Click OK after entering any telephone number in the dialog box.

4. At the next dialog prompt, click Cancel.

5. Type "AT" and press Enter. You should see a response, OK.

6. Your modem is now ready to run.

5.3.2 Setting the Country

1. From the Windows taskbar, click Start> Settings>Control Panel.

2. Double-click on the HSF Modem Country Select icon.

3. Change it to the country that you are currently in.