User`s manual

Chapter 5  Testing the Modem Card

If your modem is not installed properly, the set of AT commands will not be

listed. You may also be prompted by an error message, stating that it was unable

to open the COM Port. If this happens, refer to the Appendix B - Troubleshooting

Guide While testing the modem, the system gave an error message stating

that it was unable to open the COM Port.

5.1.2 Setting the Country

Ensure that the country setting is correct for your location. In some cases, the

country is set to match the Operating System selected and re-selection is

required to match your exact location. To change the current setting, do the

following:

Windows® Me

1. From the Windows taskbar, click Start> Settings>Control Panel.

2. Double-click on the HSF Modem Region Select icon.

3. Change it to the country that you are currently in and click OK.