Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 99
3. Check one or more checkboxes of the corresponding members that ought to be deleted from the Members table. Press Select all if all
members ought to be deleted.
4. Press the Delete button on the IP Pool Group Configuration page.
5. Confirm the deletion with Yes or quit with No.
To Delete a Group
1. Select the Manage IP Pool Groups link. The IP Pool Configuration page appears with the table of groups (if any).
2. Check the one or more checkboxes of the corresponding groups that ought to be deleted from the groups table. Press Select all if all groups
ought to be deleted.
3. Press the Delete button on the IP Pool Configuration page.
4. Confirm the deletion with Yes or quit with No.
IDS Log
The IDS logging page contains information about dropped packets
and the senders responsible for those packets. IDS discards
dangerous packets or packets including intrusion attacks and
generates a table with the IDS log report. The administrator can be
notified about newly logged entries in various ways (mail, display
notification and Flashing LEDs) depending on the settings on the
Event Settings page. To make an IDS log reporting table, IDS
needs to be enabled on the
ATM Statistics page.
The IDS Logs table is a list of new or read IDS entries and
descriptions referring to them. The table provides a status row that
has the value New if the entry is still unread or that is empty if the
entry has already been read.
Mark All as Read marks all IDS logged entries as read and
removes the New status from the Status row of the IDS entries
table.
Delete Log is used to delete all entries from the IDS table.
A detailed log of the selected entry can be seen by clicking on the
Description link of the corresponding entry in the IDS Entries
table.
Fig. II-165: IDS Log page
The IDS Logs detailed page has a following preview:
The Issue Detailed Log table is a detailed list of new and read IDS
entries. The table contains a Status row that has the value New if
the entry is still unread or that is empty if the entry has already
been read.
Fig. II-166: IDS issue detailed preview