Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 36
When user dials the pickup extension having several extensions of the pickup group ringing, the first (oldest in time) call will be picked up. When user
dials the pickup extension having no ringing extensions of the pickup group, “No call is available to pickup” message will be played to the user. When
user that is not listed in the Access List dials the pickup extension, password authorization (of the pickup extension) will be required to pick up the
call. When a denied user dials the pickup extension, “Party does not accept your call” message will be played to the user.
For Pickup Group extensions, Extensions Management - Edit Entry page consists of General Settings, SIP Settings and Advanced SIP
Settings pages. The SIP Settings and Advanced SIP Settings pages are the same as for the regular extensions and are described above, while
General Settings page has a different content:
1. General Settings (for pickup group extension)
This group requires personal extension information and has the
following components:
Display Name is an optional parameter used to recognize the
caller. Usually the display name appears on the called party’s
phone display whenever a call is performed or a voice mail is
sent.
Password requires a password for the new extension.
The extension password may only contain digits. If non-numeric
symbols are entered an “Incorrect Password: no symbol
characters allowed” error will prevent making the extension.
Confirm Password requires a password confirmation. If the
input is not corresponding to the one in the Extension
Password field, the error will appear: “Incorrect Password
confirm”.
Fig. II-62: Extensions Management - Edit Entry – General Settings for pickup extension page
The Edit Pickup Group link leads to the page where a list of monitored extensions can be defined.
The Pickup Group of Extension page lists all extensions in
the pickup group, i.e. those that can be monitored and the
calls addressed to which may be picked up by calling the
corresponding pickup extension.
Add functional button opens an Add Entry page with an only
drop down list containing all available extensions on the
Quadro.
Fig. II-63: Pickup Group of Extension page
The Edit Access List link leads to the page where users permissions to use the pickup service can be defined.
The Access List of Extension page lists all users (or a group
of users, if wildcard is used) and the appropriate permissions to
pickup the calls ringing on the extensions from the Pickup
Group.
Fig. II-64: Access List of Extension page
Add functional button opens an Add Entry page where new
user with corresponding permissions might be created. Page
consists of the following components:
Call Type lists the available call types:
• PBX - local calls from Quadro’s extensions
• SIP – calls through a SIP server
• PSTN – calls from global telephone network
• Auto – used for undefined call types. Destination
(independent on whether it is a PBX number, SIP
address or PSTN number) will be parsed through Call
Routing Table.
Address text field is used to define the address to be included
in the Access List table. The value in this field is strictly
Fig. II-65: Access List of Extension –Add Entry page