Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 28
Features
This page lists all features, that may be activated by a software
key, characterized by a Feature Description and provided with its
Status:
• No Key Found - the feature is currently not available
• Reboot Needed - the feature key has been entered and
Quadro has to be rebooted
• Activated - the feature is available
Following features may be activated via the software key:
• IP Phone support - enables additional LAN-sided IP
phones on the Quadro. For Quadro4x, 12 more and, for
Quadro16x, 40 more IP phones could be connected to the
Quadro.
• Debug – enabled Telnet connection towards the Quadro
for debugging purposes.
To enter a Feature Key click Add. A page with the text field
Feature Key is opened. Enter the key and press Save. The status
of the selected feature entry will change to Reboot needed.
Reboot the Quadro and the feature will get the status Activated.
To get a Feature Key register the Quadro device and send a
corresponding request to Epygi's Technical Support. This request
must include the Unique ID that is displayed in the Features page
above the features list.
Fig. II-45: Features page
Fig. II-46: Features Add page
Upload Language Pack
Upload Language Pack page allows to upload a custom language
for GUI and Voice Messages of the Quadro. The language of voice
messages can be switched to the custom Language Pack
language from GUI setting page at the
System Configuration
Wizard
. The language of GUI session can be changed to the
custom Language Pack language from the radio buttons on the
login page.
Uploading a Language Pack will cause the loss of the following
data:
• All internally stored voice mail
• DHCP leases
• Call statistics
• Pending events
• Transfer statistics
Please Note: Only one custom Language Pack can be uploaded
at the time. Uploading a Language Pack will remove the existing
one (if existing) and will reboot the Quadro.
Fig. II-47: Upload Language Pack page
Current Language Pack field displays a read only information about the custom language pack uploaded. When no custom language pack is
uploaded, field indicates “unknown”.
Below, there is a Language Pack File to Upload text field which displays the selected image filename. Browse button is used to browse the custom
language pack to be uploaded.
Remove Current Language Pack link is seen only when custom language pack is uploaded and is used to remove it from the system.
Pressing Save will start uploading the custom language pack to the board. The next page will be displayed, showing the result of a verification of the
language pack being uploaded and asks for confirmation to overwrite the existing custom language pack (if any).
After final confirmation, system will upload the selected custom Language Pack and will reboot.
User Rights Management
User Rights Management service is used to set restrictions on the GUI access for various users, to permit or deny the access to certain Web GUI
configuration pages and to create a multilevel user management of the Quadro. Feature is mainly useful to the ISPs to set the restrictions for certain
customers to manage the Quadro’s configuration.
Two levels of Quadro GUI administration are available: