Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 21
Fig. II-31: Event Warning on the Main Menu page
The System Events table is the list of new and read system
events. System events have the corresponding coloring
depending on the nature of the event: success (priority 1, color
green), low importance failure (priority 2, color yellow), critical
failure (priority 3, color red).
The table shows the Status of the event (new or read) as well as
the name of the application the event refers to, event description,
and the date when the event was received. For example, if the
event has been caused by the IDS service, the Check IDS link
appears in the reference row that will lead to the
IDS Log page,
or if the event has occurred due to incorrect mail sending or SIP
registration, corresponding links will be seen in the Reference
column of the table. There the administrator can view the
detailed log for the event that has occurred.
The System Events page offers the following components
:
Current System Time displays the local date and time on
Quadro.
Mark all as read marks newly occurred events as read.
Disable LED switches off the LED flashing (if any do flash) on
the board. A LED notification may appear (depending on the
notification type given) in the page
Events settings whenever a
new event occurs.
Fig. II-32: System Events list