Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 19
The Backup & Download all config & voice data link
generates a backup file with all configuration settings and
user uploaded greeting messages and opens a file chooser
window for immediate download to the user PC.
Attention: Configuration and voice data cannot be backed
up if the size of voice data is too large. In this case, to be
able to backup configuration and voice data on the Quadro,
please remove some user defined system messages (by
restoring the default ones, see chapter Update System
Messages), or remove some extensions from the
Extensions Management table.
Fig. II-28: Configuration Management page
The Upload & Restore all config & voice data link opens a page with the Browse button, (which opens a file chooser to select a backed-up file)
and a Configuration to Upload field requiring the file path to upload and to restore it immediately. Pressing Save will restore the selected backup
file, and delete all current user defined greetings and replace configuration settings.
Attention: Restoring the configuration and voice data requires switching Memory Allocation (see chapter
Voice Mail Common Settings) to the state
that was selected when the configuration and voice data were backed up, otherwise an error message prevents uploading the backup file.
The Use Default functional button resets all configuration settings and restores the board’s factory default configuration. By restoring the default
configuration you will replace your current one, lose all voice mails and reboot the device. You will not be automatically redirected to the GUI start
page. After the successful reboot you will need to enter into the management and login again to access the Quadro’s configuration. A warning
message will ask you to confirm your selection before restoring the default configuration.
Please Note: Unlike the factory default settings restore procedure initialized from the Reset button on the Quadro board, this link will keep the
following data:
• Call Statistics
• Transfer Statistics
• System Events
• Feature Keys
• Device Registration state
Update Configuration link leads to the page where Quadro’s configuration can be automatically or interactively update, downloaded and edited.
Update Configuration
The Update Configuration allows to automatically or interactively update Quadro’s configuration, as well as to download a legible and editable
configuration file, make necessary changes and upload it back to the system. This particularly allows to use parts of the configuration of one Quadro
on another Quadro with some changes done prior to uploading the new configuration. Service is mainly used by Quadro reseller, distributor, ISP or
carrier.
Attention: It is strongly recommended to consult with technical
support center before making changes on this page. Incorrect
settings here may corrupt current configuration. Page consists of
the following components:
Server and Server Port text fields require IP address or Host
name and the port number of the server configuration will be
downloaded from.
Update Method drop down list indicates the connection type
used to download the configuration (ftp, tftp, http or https).
Enable Version Check checkbox selection enabled version
verification before configuration is being downloaded.
Attention: Disabling Enable Version Check checkbox may
cause incompatibility problems on the device.
Update Interval Selection manipulation radio-button group is
used to select the frequency of configuration check/update
performed on the Quadro:
• Check/Update at boot time – with this option, new
available configuration will be checked/updated each time
after Quadro boots.
• Check/Update manually – with this option, configuration
check/upload will be performed only by manual selection.
• Check/Update time/date scheduled – with this option new
available configuration will be checked/updated periodically
dependent on the selected time and/or weekday. This