Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 14
Static Parameters:
Extension shows the extension number of the selected telephone line.
Display Name shows the corresponding name.
Phone State may have the value on hook or off hook.
Number of Active Calls shows the number of calls that are currently
present on the phone.
Dynamic Parameters:
Call State shows the current state of the extension (in voice mail, in
call, waiting, busy, call out, ring in, etc.).
Caller Party appears whenever a call is received and indicates the
caller extension and the IP address or a phone number, depending on
the call type.
Called Party appears whenever a call is placed and indicates the
destination extension and the IP address or a phone number,
depending on the call type.
Call Type shows whether the call is Internal or External and whether it
is a PSTN, PBX or an IP Call.
Call Start Time shows the call start date and time.
Call Duration shows the current call duration.
RX Codec shows the codec used to encrypt the incoming packets. TX
Codec shows the codec used to encrypt the outgoing packets. If RX
and TX codecs are the same, one Codec field will be displayed instead.
Fig. II-15: Lines Status - Line Status page upon established call
There is a list of supplementary services with their statuses for each
telephone line: Enabled, Disabled or -in case of the services Incoming
and Outgoing Call Blocking, Speed Calling, Hiding Caller Info and
Voice Mailbox - the number of Entries in the corresponding service table.
Thus the administrator may follow and will be notified about services
running on Quadro for every line. The services are designed as links that
guide the administrator to the corresponding service page of the selected
user.
Fig. II-16: Quadro Status - Lines Status