Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 11
The WAN Interface Configuration page may be used to modify the
MAC address of the Quadro. This might be necessary, if the ISP
(Internet Service Provider) requires a certain MAC address, for
example, for authentication. The page offers the following
components:
MAC Address Assignment manipulation radio-buttons:
• This Device turns to the default MAC address of the Quadro.
• User Defined requires user defined MAC Address.
MTU drop down list allows to select the maximum packet size on the
Ethernet (in bytes). MTU is used to fragment the packets before
transmitting them to the network. MTU preferred value is dependent
on the Ethernet connection type. The default MTU size is 1500 Bytes
for Ethernet and 1400 Bytes for PPPoE.
The ATM Bridge Settings manipulation radio buttons group is
present if PPPoA, 1483B or 1483R WAN Interface Protocol has been
selected and if the Quadro has corresponding ADSL or G.SHDSL
interface. Selection is used to choose between manual or default
ADSL or G.SHDSL connection parameters. For Default selection, the
preconfigured parameter set can be selected from the list. For
Manual selection, VPI, VCI and Encapsulation parameters should
be specified manually. Please turn to the ISP administrator to get the
corresponding settings.
Fig. II-10: Internet Configuration Wizard - WAN MAC Address Configuration page
Status
The system status window displays non-editable tables providing extensive status information about Quadro: General Information, Network Status,
Lines Status, Memory Status, Hardware Status and SIP Registration Status. The links on this page lead to device Transfer Statistics, user mailboxes
and supplementary services configuration pages.
The System Status page has several tables providing system information.
General Information
The General Information page includes the following
information:
• Uptime duration - Period Quadro is on since last
reboot.
• Device Hostname - Quadro device host name.
• Quadro Operating System - Quadro operating system
version.
• Application Software - Software and file system
versions of the Quadro.
• Boot Loader - Quadro boot loader version.
•
DSP Software - Quadro DSP software version and the
date of build.
•
Preinstalled Languages – field is present only when
multiple languages are preinstalled on the device and
indicates the system default languages.
•
Language Pack – field is present only when custom
language pack is uploaded and indicates its version.
Fig. II-11: Quadro Status - General Information page