Installation guide

Quadro Manual II: Administrator's Guide System Default Values
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 104
Parameter System Default Value
11-26 extensions are attached to the FXS lines 1-16,
31-78 extensions attached to the IP lines 1-48,
Call Relay – disabled,
Call Park – disabled,
External Call Policy – disabled,
Percentage of System Memory for extensions 11-26 – 2%,
Percentage of System Memory for extensions 31-78 – 1%.
Extension Settings – SIP
Registration username and password - automatically generated,
SIP server - sip.epygi.com,
SIP Server port – 5060,
SIP Server Registration – enabled.
Extension Settings – SIP Advanced
User ID – undefined,
Send Keep-alive Messages to Proxy – disabled,
RTP Priority Level – medium,
Outbound Proxy, Secondary SIP Server and Outbound Proxy for Secondary SIP
Server – undefined.
Extension Settings – Remote Remote Extension – disabled
Extension Settings – Call Queue Call Queue – disabled
Extension Settings – Voice Mailbox
Internal Voice Mail for all extensions except 14.
Extension 14 – Disabled Voice Mail.
Extension Settings – Codecs
Codecs - G711u (preferred), G711a, G729a, G726/32, G726/16, G726/24, G726/40
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls - disabled.
Attendant 00 Settings – General
(for Quadro4x and Quadro4xi)
Display name – Attendant,
FAX forwarding – disabled,
Percentage of System Memory – 3%.
Attendant 00 Settings – General
(for Quadro16x and Quadro16xi)
Display name – Attendant,
FAX forwarding – enabled, Extension to forward – 22,
Percentage of System Memory – 1%.
Attendant 00 Settings – Attendant
Scenario
Scenario – default,
Send AA digits to Routing Table – disabled,
Welcome and Menu messages – default,
Authorized Phones Database – undefined.
Attendant 00 Settings – SIP and SIP
Advanced
Same as for an extension.
Attendant 00 Settings - Codecs
Codecs - G711u (preferred), G711a, G726/16, G726/24, G726/32, G726/40, G729a,
G723, iLBC
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls - disabled.
Receptionist Management No entries
Extension Directory
No entries
Call Statistics
Enabled
100 entries for all type of calls
SIP Settings
UDP and TCP Port – 5060,
Session Timer – disabled,
DNS Server for SIP – default,
SIP timers – RFC 3261.
RTP Settings
Properties for all Codecs except G723 and iLBC :
Packetization -20ms