Installation guide

Quadro Manual II: Administrator's Guide Administrator's Menus
Quadro4x, 4xi, 4xa, 4xia, 4xs, 4xis, Quadro16x, 16xi, 16xa, 16xia, 16xs, 16xis; (SW Version 3.1.x) 101
The DHCP Leased IP Addresses page includes a list of the
leased host addresses that are part of the Quadro’s LAN. For
these hosts, Quadro acts as a server supplying them with a
unique IP address. It displays a read-only table describing all
the leased IP hosts and their parameters. The table contains
the following columns:
IP address - host IP address, assigned by Quadro.
MAC address - host MAC address, provided by the host itself.
Lease Start - date and time when the leased IP address has
been activated.
Lease End - date and time when the leased IP address has
been or will be deactivated.
Hostname - hostname, provided by the host itself.
Fig. II-171: DHCP Leases page for LAN interface
Registration Form
The Registration Form page appears when administrating an
unregistered Quadro, and has been established for customer
support purposes. The page requires customer registration at
the Epygi Technical Support Center. It provides several links
offering registration options:
Register now leads to the Epygi Technical Support System
Registration page and requires customer’s information to
submit the Quadro registration form.
Remind me later hides the registration notification until the
next administrating the Quadro through
System Configuration
Wizard
or Internet Configuration Wizard.
Don’t remind me more hides the registration notification
forever.
Fig. II-172: Device Registration page
Administrator’s Additional Features
Incoming Call Blocking and Outgoing Call Blocking
The Incoming Call Blocking and Outgoing Call Blocking pages offer extended features for the administrator to activate incoming/outgoing call
blocking services for certain callers. This configuration cannot be changed by the users.
For more information on the Call Blocking Settings pages, see Incoming Call Blocking and Outgoing Call Blocking chapters of the Extensions
Users Guide - Manual III.
The Call Blocking pages accessed from Caller ID Based
Services table by clicking on the corresponding address, give
administrator a possibility to enable blocking services which
could not be disabled by the users.
Besides the components seen for the user, an additional
Protect this entry checkbox is available in the Call Blocking -
Add Entry pages for administrator access only. With this
checkbox selected, user will be unable to deactivate the
blocking services configured by administrator.
Fig. II-173: Blocking Page for the Administrator
Logout
This option is used to close the session between the user PC and Quadro and to leave the Quadro Web Management or to enter the management
with another login. By selecting the Logout button, the startup page will be displayed and the user needs to login again.